MIG/MAG Welder

You weld steel profiles and plate on jigs, following the drawing and the weld symbol given for each joint. The shift starts with a check of the wire feed, the gas flow and the earth clamp, then comes tacking, the fill passes and grinding where the seam will be painted. You measure the frame with a tape and a square before it leaves the jig, stamp your own work and report porosity or undercut to the welding foreman. Two shifts run 07:00-15:00 and 15:00-23:00 with a weekly rotation.

Trade school in welding or metalwork, or equal practice

At least two years of MIG/MAG on steel above 3 mm

Reading a fabrication drawing and weld symbols

Steady with an angle grinder, a square and a tape

Passing the shop weld test on a fillet and a butt joint

Willing to rotate two shifts

Basic English for machine settings and safety labels

Net salary from 820 up to 984 EUR per month

Permanent contract after the weld test

Afternoon shift supplement paid by the hour

Hot meal in the canteen on every shift

Company transport from Kragujevac

Paid certification to EN ISO 9606 at a testing house

Mask, leather apron, gloves and safety shoes provided

Welders who pass the certification move to the structural team and to work that carries a weld log. Foremen on this line are chosen from among the certified welders.

A covered hall with a fume extraction arm at every booth, welding screens between the bays and a separate grinding corner with extraction. Mask, apron, gloves and safety shoes are mandatory.